Downloads and How to Reset Printer Canon IP 1980

Canon iP1980 printer needs to be reset in the event of :

1. Blink 4x orange 1x green. (how to solve this particular blink read HERE)
2. Green flashes orange alternately during the 7x (Ink Absorber Full),
3. Orange 8x ink tank full

The following steps reset iP1980 :

1. Driver must already be installed. If you do not have a driver click here.
2. The printer should be in service mode (temporary reset).
               To activate the service mode :

• Unplug the electrical power
• Press the power (on the printer)
• Electrical power outlet (the light is green)
• While pressing the power press the reset button (light turns orange)
• Remove the two (the printer will die)
• Press the power button again and release directly. (Light is green) (do not unplug the electrical power)

3. Run the General Service Tool. If you do not have, download HERE / resetter canon IP 1980 
4. Disconnect electric power, plug back in and turn (initial printer / ill wait until the lights blink. Done

How to run a General Service Tool

1.  Exctrak files that you download
2. Windows should be 1024x768 resolution
3. Run the file "GeneralTool.exe"
4. Select the USB Port
5. Check Cleaning and Eeprom Clear
6. Click the Main
7. Click Platen
8. Done Quit
9. Turn off the printer by pressing the power.

Completed, then you just try to unplug the printer power cable and put it back, then turn on your printer